Download Firmware Software LAD.MV59S
The LAD.MV59S is a complete combo board for LCD and LED televisions. Headphone Jack, USB Input, PC Input, VGA Input, HDMI Input, and Component Input are all easily accessible on this board. Board LAD.MV59S On this board, there is no need to install the backlight separately. Inside is a back-light inverter circuit as well as a power supply.
Basic Information PCB Board
Model No: LAD.MV59S
Main Chip:
Resolution Supported UP To 1920 X 1080 to Panel LCD/LED TV
Screen Supported: Up 32” to 42” Panel LCD/LED
Back Light Pin Information:
Back Light Supported Up To 300/Ma
Panel Voltage Dc: +12 V
Main Ac Power Supply: 220 V
HDMI Input: 2 Ports
USB Input: 2 Ports
VGA Input: 1 Port
PC Input & Audio / Video: Yes
Headphone: Yes
RF TV: 1 Port
Component Input: Yes
Multi-Language OSD: Yes
Aspect Ratio:
USB Port Upgrade: YES
LAD.MV59S Service Code
The service code is used to unlock factory mode or the board internal parameters setting. These settings allow the technicians to control the parameters of the Led TV logo, resolution, brightness and contrasts etc.
To unlock the factory mode for LAD.MV59S PCB Board use following steps.
Press Menu button form remote keyboard
Enter the numeric code 7710 through remote
How to download and run Firmware LAD.MV59S
To download the required firmware click on Download Button given below table.
When download is completed, the file will stored in your PC download folder.
Copy the firmware file into empty USB. Make sure USB have no other data.
Plugin the USB in the LED/ LCD Main Board USB port.
Switch ON the LED TV power and Wait until LCD/LED Flashing Stop or LED IR Flashing Speedily Working.
When the LED IR stop flashing, remove the USB from the TV LCD/LED board.
Note: Do this process fast otherwise it will not work.
| Sr.No | Description | Download Link |
|---|---|---|
| 1 | LAD.MV59S_China R.C_Samsung_UP Side & Sidha | Download |
| 2 | LAD.MV59S.G_ulta_Sony_32_Down Side | Download |
| 3 | LAD.MV59S.G_Samsung_1920 X 1080 | Download |