Download Firmware Software MSOV591-ZC01-01
The MSOV591-ZC01-01 is an analogue LCD/LED TV control board that can be used in both Asia and the Middle East. LED panels with resolutions up to 1920x1080 can be used on the display, with sizes ranging from 24-inches to 42-inches. A USB interface is provided for multimedia file playback and software upgrades.
There are two HDMI ports on the MSOV591-ZC01-01. Version 1.1 of HDCP support is available. MSOV591-ZC01-01 supports LCD/LED panels with resolutions of Non-HD and FHD. MS0V591-ZC01-01 has a widescreen version as well as a multi-language version. MSOV591-ZC01-01 has its unique set of security features.
Basic Information PCB Board: MSOV591-ZC01-01
Model No: MSOV591-ZC01-01
Main Chip: TSUMV591XUS-Z1
Resolution Supported UP To 1920 X 1080 to Panel LCD/LED TV
Screen Supported: Up 24” to 46” Panel LCD/LED
Back Light Supported Up To 35 W to 45 W
Panel Voltage DC: + 12 V
Main AC Power Supply: 220 V
HDMI Input: 2 Ports
USB Input: 2 Ports
VGA Input: 1 Port
PC Input & Audio / Video: Yes
Current: Without Panel (5000Ma)
TV System: SECAM/NTSC PAL/
IR Control: Yes (Remote Control)
Key Button Functions: VOL+/VOL- Source/Power/CH-/CH+/MENU
Input & Output Ports: AV, Earphone Out, HDMI, USB, RF TV interface, and VGA
Headphone: Yes
Audio OUTPUT: 2 x 8 Watt (8 ohms)
RF TV: 1 Port
Component Input: Yes
Multi-Language: Yes
USB Port Upgrade: YES
Service Code MSOV591-ZC01-01
The service model allows you to change the board’s internal parameters or unlock the factory code, Resolution Code, etc.
Through the remote, enter the numeric code Input/Source 2580.
How to download and install Firmware MSOV591-ZC01-01
To download the required firmware click on Download Button given below table.
When the download is completed, the file will be stored in your PC download folder.
Copy the firmware file into an empty USB. Make sure the USB has no other data.
Plugin the USB in the LED/ LCD Main Board USB port.
Switch ON the LED TV power and Wait until LCD/LED Flashing Stop or LED IR Flashing Speedily Working.
When the LED IR stops flashing, remove the USB from the TV LCD/LED board.
Note: Do this process fast otherwise it will not work.
1 MSOV591-ZC01-01-Haier-LE32B8000-Tuner-18275 Download