Download Firmware Software T.V56.03

 Download Firmware Software T.V56.03 

All Resolution Code 

Firmware-Software Update T.V56.03 Download all resolution codes for LCD/LED for free. The T.V56.03 is a complete universal board for LCD and LED televisions. T.V56.03 Board has Headphone Jack, USB Input, PC Input, VGA Input, HDMI Input, and Component Input, among other features. Different countries use the T.V56.03 Universal Boards.

Basic Information PCB Board: T.V56.03

Model No: T.V56.03

Main Chip: TSUMV56RUU-Z1

Resolution Supported UP To 1920 X 1200 to Panel LCD/LED TV

Screen Supported: Up 14” to 32” Panel LED & LCD

Panel Voltage DC: +3.3V/+5V/+12V

Main AC Power Supply: 220 V

HDMI Input: 1 Port

USB Input: 1 Port

VGA Input: 1 Port

PC Input & Audio / Video: Yes

IR Control: Yes (Remote Control)

Key Button Functions: VOL+/VOL- Source/Power/CH-/CH+/MENU

Input & Output Ports: AV, Earphone Out, HDMI, USB, RF TV interface, and VGA

Headphone: Yes

RF TV: 1 Port

Component Input: Yes

Multi-Language: Yes

USB Port Upgrade: YES

Service Code: T.V56.03

The service model allows you to change the board’s internal parameters or unlock the factory code, Resolution Code, etc

Through the remote, enter the numeric code. Menu+1147

Boot Logo Setting: T.V56.03

Put your logo into the USB disk.

Connect your U disk with the main board.

Find your logo in a multi-media file.

Select your logo.

Press No 6 on the remote control to change to full-screen play, then press OK, on the remote control, on the bottom of the option items, there is a “ catch” choose it done.

How to download and install Firmware.

1. To download the required firmware click on Download Button given below table.

2. When the download is completed, the file will be stored in your PC download folder.

3. Copy the firmware file into an empty USB. Make sure the USB has no other data.

4. Plugin the USB in the LED/ LCD Main Board USB port.

5. Switch ON the LED TV power and Wait until LCD/LED Flashing Stop or LED IR Flashing Speedily Working.

6. When the LED IR stops flashing, remove the USB from the TV LCD/LED board.

7. Note: Do this process fast otherwise it will not work.

Sr.NoDescriptionDownload Link