How to increase Wi-Fi speed and overall signal quality
1 - Use WiFi boosters
A Wifi Extender or Repeater is a device that simply allows you to carry an internet signal over the wires in your home, that way if you have a router in a room and the signal doesn't reach the room, you can simply pass it through the sockets to get a greater coverage of the signal, the only thing we have to do It is to connect our router to your PLC packet emitter via Ethernet cable, then connect the boosters to the nearest port, then just plug the extender into any other port in your house, and it will act as a router, then we have repeaters that pick up the signal from an existing WiFi network to extend it on More space.
2 - Put the router in the optimal position
Oftentimes, some technicians who install your router will limit it to placing it as close as possible to the phone connection to your home or the computer you are using, but this is not always the best position to cover as much space as possible in your home, so the first tip is to try to place a router Routing is centrally located in your home, whether vertically if you have several floors or horizontally, and imagine coverage as a circle around the router. The angles are more uniform.
3 - Choose between 2.4GHz and 5GHz WiFi band
If you have a dual-band router, it is also convenient to know when to connect your devices to the 2.4GHz and 5GHz bands, and both of these bands have different characteristics, and the 2.4GHz band usually has more interference, making the connection slower as well It has fewer channels, so all devices are fighting over a very small space. The 2.4GHz WiFi band also has a lower maximum connection speed but much stronger coverage than the 5GHz band, in contrast, the 5GHz band has more channels to distribute. Among devices, the maximum connection speed is higher, and its negative point is that it has more problems to overcome obstacles such as walls, so its coverage is usually lower in many cases as we said earlier.
If the speed is slow due to the crowded channel, restarting may help because it forces the router to choose the best channel with the least interference during booting and booting.