Download Firmware Software TP.SK108.PA672

 Download Firmware Software TP.SK108.PA672

Free software download for TP.SK108.PA672. TP.SK 108.PA672 Supported Screen Size Up to Suitable for LCD & LED TVs from 24" to 32" TP.SK108.PA672 Software is available for free download. Firmware TP.SK108.PA672 is available for free download. Headphone Jack, USB Port, PC Port, VGA Input, HDMI Input, and Component Input are all included on the TP.SK108.PA672 Firmware Download Board. Because the backlight is built-in, there is no need to install it separately. Inside the PCB is a backlight inverter circuit and a power supply. They're used in a variety of countries. Combo boards TP.SK108.PA672 Firmware Download PCB Board LAD.MV59S is available for free download.

TP.SK108.PA672 Software Download

Basic Information PCB Board:TP.SK108.PA672

Model No: TP.SK108.PA672

Resolution Supported UP To 1920 X 1080 to Panel LCD/LED TV

Screen Supported: Up 24” TO 32” Panel LCD/LED

Back-light Voltage: +18 V To +60 V

Panel Voltage DC: +12 V

Main AC Power Supply: 220 V

HDMI Input: 2 Ports

USB Input: 2 Ports

VGA Input: 1 Port

PC Input & Audio / Video: Yes

Headphone: Yes

RF TV: 1 Port

Component Input: Yes

Multi-Language OSD: Yes

Aspect Ratio: 4:3 / 16:9 / 16:10

USB Port Upgrade: YES

Service Code: TP.SK108.PA672

The service model allows you to change the board’s internal parameters or unlock the factory code, Resolution Code, etc. Screen Specification Adjustment: Factory setting–Use the right key.

Through the remote, enter the numeric code.Menu +1147 & Menu+2008

How to download and install Firmware.

To download the required firmware click on Download Button given below table.

When the download is completed, the file will be stored in your PC download folder.

Copy the firmware file into an empty USB. Make sure the USB has no other data.

Plugin the USB in the LED/ LCD Main Board USB port.

Switch ON the LED TV power and Wait until LCD/LED Flashing Stop or LED IR Flashing Speedily Working. Remove USB From TV PCB Board.

Note: Important Note Updating Firmware: is not responsible for any type of loss or damage to the PCB board during the installation of firmware. You can download and run firmware at your own responsibility.

Sr.NoDescriptionDownload Link