Download Firmware Software T.R 83.801
Firmware for T.R 83.801 is available for free download. T. R 83.801 is a complete board for LCD and LED televisions. Headphone Jack, USB Input, PC Input, VGA Input, HDMI Input, and Component Input T.R 83.801 Board are all conveniently accessible. On this board, there is no need to install the backlight separately. Inside is a back-light inverter circuit as well as a power supply. In several nations, the T.R 83.801 is used.
Basic Information PCB Board T.R 83.801
Model No: T.R 83.801
Main Chip: RDA 8503
Resolution Supported UP To: 1920 X 1080 to Panel LCD/LED TV
Screen Supported: Up 26” to 32” Panel LCD/LED
Back Light Pin Information: 2 Pin-2.0+3 Pin-2.0 & 2 Pin-2.0+2 Pin-2.0
Back Light Supported Up To: 12 V to 94 V
Panel Voltage Dc: + 5 V / +12 V
Main Ac Power Supply: 220 V
HDMI Input: 2 Ports
USB Input: 2 Ports
VGA Input: 1 Port
PC Input & Audio / Video: Yes
Headphone: Yes
RF TV: 1 Port
Component Input: Yes
Multi Language : Yes
Aspect Ratio: 4:3 / 16:9 / 16:10
USB Port Upgrade: YES
T.R 83.801 Service Code
The service code is used to unlock factory mode or the board internal parameters setting. These settings allow the technicians to control the parameters of the Led TV logo, resolution, brightness and contrasts, etc.
- Download Firmware Software T.R 83.801
- Download Firmware Software CV 59SH-E32
- Download Firmware Software LAD.MV56U
- Download Firmware Software LAD.MV59S
- Download Firmware Software P65-59S V 6.3
To unlock the factory mode for T.R 83.801 PCB Board use following steps
Press Menu button form remote keyboard.
Enter the numeric code 1147 through remote .
How to download and run Firmware T.R 83.801
To download the required firmware click on Download Button given below table. When download is completed, the file will stored in your PC download folder.
Copy the firmware file into empty USB. Make sure USB have no other data.
Plugin the USB in the LED/ LCD Main Board USB port.
Switch ON the LED TV power and Wait until LCD/LED Flashing Stop or LED IR Flashing Speedily Working.
When the LED IR stop flashing, remove the USB from the TV LCD/LED board.
Note: Do this process fast otherwise it will not work.
Note: Important Note Updating Firmware:
I am not responsible for any type of loss or damage to the PCB board during the installation of firmware. You can download and run firmware your own responsibility.
Sr.No | Description | Download Link |
---|---|---|
1 | T.R83.801-Samsung-1366X768 | Download |